Level I Technician Course

Course objective:

To provide a basic Knowledge of Magnetic Particle Test and enable a candidate to carry out tests according to an established procedure under supervision of a level II or III personnel. This course is especially designed to provide a sound theoretical knowledge and required practical skill for a level I technician.

MT Level I Technician Responsibilities

To carry out operations as per written procedure/instruction from level II personnel. He shall be able to set up test equipment, calibrate and carry out tests, classify and report the results. He shall not be responsible for the choice of test technique nor for assessment of the test results.

MT Level I Course outline

  1. Basic of Magnetism
  2. Magnetisation Techniques
  3. Inspection Mediums
  4. Inspection Techniques
  5. Indication Classification
  6. Test Equipments and Accessories
  7. Demagnetisation
  8. Types of Discontinuities

MT Level I Practical Training

Yokes, Prods, Headshot, Central Conductor, Coil Techniques, Using dry, wet ordinary and wet fluorescent powders, Demagnetisation.

Level II Technician Course

Course objectives

The course is intended to provide detailed instruction in theory and practical such that the personnel shall be able to

  • Identify suitability of MT for material and inspection procedure.
  • Develop inspection techniques and procedure that shall be followed by level I operator.
  • Analyse the test results.

MT Level II Technician Responsibilities

  1. To select proper test technique and equipment as per established procedure
  2. To calibrate, set and carry out test or supervise testing by level I Technician
  3. Prepare test report for acceptance/rejection as per standard
  4. Have knowledge of merits and limitations of MT and other common NDT methods
  5. Prepare written procedure for level I operator
  6. Responsible for care and maintenance of testing equipments and accessories

MT Level II Course outline

  1. Review of Level-I course
  2. Selection of Techniques
  3. Codes, standards and Procedures
  4. Acceptance Standards
  5. Manufacturing Process and Discontinuities
  6. Interpretation of Indications
  7. Preservation of Indications
  8. Evaluation of Test Equipment

MT Level II Practical Training

All the practical of Level-I  plus Interpretation, evaluation and recording of test results.

AC YOKE MT
Magnetic Particle Testing
PORTABLE COIL MT
MT
CENTRAL CONDUCTOR
Magnetic Particle Testing Machine Prod Method
 FIELD INDICATOR (PIE GAUGE)
MT Field Strength verification
FLUORESCENT MT
Magnetic Particle Testing
COIL MT
Magnetic Particle Tesing Equpiment Coil Type
CONTACT TO REGISTER